Broken glass stays together
Less dangerous glass scatter around entries, counters and workstations.
Silicon Valley Glass Coating
Safety & Security Window Film for Commercial Glass in Milpitas
Make the glass you already have harder to breach. Thick LLumar safety film helps storefront, entry and ground-floor glass hold together under impact — so a smash-and-grab takes longer and broken glass stays out of your space.
Authorized LLumar dealer
Licensed and bonded
CSLB #1158593 (D-52)
16 years of experience
The problem
Standard glass can be broken in a second or two.
When it goes, glass scatters across your floor, your merchandise and your people — and the opening is wide enough to climb through. Replacing glass with laminated glazing is slow and expensive.
Safety film gives you a practical alternative: a retrofit applied to the glass you already have.
How safety film works
Held together, not scattered.
Safety film is a thick, clear polyester layer applied to the inside of existing glass. When the glass is struck, the film holds the pieces together instead of letting them scatter.
For the highest level of protection, we can add a silicone attachment system that bonds the film to the frame. Film alone holds the glass together. Film with an attachment system keeps the whole pane in place — which makes forced entry meaningfully harder.
More time
Unprotected glass may be breached in a second or two. Thick film with an attachment system can extend that to a minute or longer, which gives you response time.
No glass replacement
Applied over existing windows and doors with minimal disruption — typically more cost-effective than laminated glass.
Tested products, manufacturer backing
LLumar safety film is tested to safety-glazing, forced-entry, windstorm and blast standards, carries a manufacturer's limited warranty, and is installed by trained professionals.
Film options
Matched to your glass and your exposure.
Clear safety film — 2 to 13 mil
LLumar SCL SR clear safety film in 2, 4, 7, 8 and 13 mil thicknesses. Protection without changing how the glass looks — about 80% visible light transmission and over 99% UV blocked on the heavier gauges. The 8 and 13 mil films are the usual specification for storefronts, entries and schools.
Solar safety film — 4 to 9 mil
The safety layer plus heat and glare control. Neutral films (N1020, N1040, N1050) in 4 and 8 mil; dual-reflective (DR15, DR25) and reflective silver (R20) films in 5 and 9 mil, rejecting up to 81% of total solar energy with up to 86% glare reduction.
Anti-graffiti film — 4 and 6 mil
LLumar GCL SR anti-graffiti film in 4 and 6 mil. A sacrificial surface layer that peels away with the vandalism — so you replace the film instead of the glass.
| Film | LLumar products we install | Thickness |
|---|---|---|
| Clear safety film | SCL SR PS2 / PS4 / PS7 / PS8 / PS13 | 2 to 13 mil |
| Solar safety film — Neutral | N1020 / N1040 / N1050 SR PS4 and PS8 | 4 and 8 mil |
| Solar safety film — Dual-Reflective | DR15 / DR25 SR PS5 and PS9 | 5 and 9 mil |
| Solar safety film — Reflective | R20 SR PS5 and PS9 | 5 and 9 mil |
| Anti-graffiti film | GCL SR RPS4 / RPS6 | 4 and 6 mil |
The PS number in each LLumar product code is the film's thickness in mil. Performance data: LLumar architectural safety film specifications (LL0115NAEN). Thicker films pair with a wet-glaze silicone attachment system for forced-entry resistance.
Not sure which fits? We match the film to your glass, your exposure and the problem you're solving.
Who it's for
Buildings with glass worth protecting.
- Storefronts and retail entrances
- Offices and lobbies with ground-floor glass
- Medical and dental offices
- Schools and campuses
- Warehouses, loading docks and light-industrial buildings
Our process
Scoped before we touch a panel.
Site walkthrough
We look at your glass, exposure, existing film and access — and what you need to protect against.
Recommendation and quote
We match the film and attachment option to your building and budget, with a clear written quote.
Scheduled installation
Work is planned around your hours to limit disruption to staff and customers.
Final walkthrough
We inspect every panel with you before we call it finished.
Safety film, answered plainly.
How long does safety film delay a break-in?
Unprotected glass may be breached in one to two seconds. Thick safety film with an attachment system can extend that to a minute or longer. Results depend on the film, the glass and the attack.
Is safety film bulletproof?
No. Film does not make standard glass bullet-resistant.
Do I need the attachment system?
Film alone helps hold broken glass together. The attachment system bonds the film to the frame so the pane is harder to push out. We'll recommend what fits your glass and risk level during the walkthrough.
Will it change how my windows look?
Clear film is designed to keep glass looking like glass. If you also want heat or glare control, solar film changes the look — and we can show you samples.
Customer Reviews
Rated 5.0 on Google.
★★★★★
“This team did a fast and quick job. Everyone loves the tint and especially great for the heat control from the blazing sun shining in. Everyone should have some tint on their windows. I was way better than the blinds my landlord gave me.”
— Dr Tuong · Google review
★★★★★
“Exceptional servers, and turnaround time”
— Jeremy li · Google review
★★★★★
Every Google review we have received so far is five stars. If your building runs hot or your glass needs protecting, start with a free walkthrough and a written quote.
Request a walkthrough
Tell us what needs protecting.
Send a few project details and we'll reply within one business day. Or call or text 510-982-6838.
Call or text: 510-982-6838
contact@wecoatglass.com
53 Minnis Cir, Milpitas, CA 95035 · Mon–Fri 8:30 AM–7 PM